Creo inventor10/8/2023 ![]() When using the "CAD Part: Creo Parametric object" or "CAD Part: Autodesk Inventor object", it is not necessary to start the corresponding CAD application prior to loading a native CAD part into OpticStudio. *Please note that the OpticStudio technical support team cannot assist with Autodesk, or Creo installation. PTC Creo Parametric® 8.0 (or one of the following legacy releases of the software: Creo Parametric 7, 6, 5, and 4) must be installed* to use the “CAD Part: Creo Parametric” object, which dynamically links to a Creo Parametric part file (*.prt).Autodesk Inventor® 2018, or later, must be installed* to use the “CAD Part: Autodesk Inventor” object, which dynamically links to an Autodesk Inventor part file (*.ipt).The first step required to use OpticStudio’s dynamic CAD capability is to install the appropriate CAD software package: Using a SolidWorks file as an example, this article will walk through how to use the dynamic CAD capability. This will allow optical engineers to be able to work with the same files that their mechanical engineers use, without the need for format conversion. The native CAD part is easily incorporated into the Non-Sequential Component Editor using the associated object type.Īny explicit dimensions defined on the object can be exposed and controlled within the Non-Sequential Component Editor. OpticStudio Premium can dynamically open Autodesk Inventor, and PTC Creo Parametric part files in Non-Sequential Mode in order to model and parametrically control objects that aren't easily modelled by primitive or common shapes. This article shows using a Creo part as an example.Īuthored By Mojtaba Falahati Introduction These parts can then be dynamically modified or optimized. OpticStudio Premium can open native Autodesk Inventor part files (IPT), and PTC Creo Parametric part files (PRT) directly in non-sequential systems.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |